RESUMEN
High-quality conjugated microporous polymer (CMP) films with orientation and controlled structure are extremely desired for applications. Here, we report the effective construction of CMP 3D composite films (pZn/PTPCz) with a controlled porosity structure and preferred orientation using the template-assisted electropolymerization (EP) approach for the first time. The structure of pZn/PTPCz composite thin films and nitrophenol sensing performance were thoroughly studied. When compared to the control CMP film made on flat indium tin oxide (ITO) substrates, the as-prepared pZn/PTPCz composite films showed significantly enhanced fluorescent intensity and much better sensing performance for the model explosive. This was attributed to the metal-enhanced fluorescence (MEF) of porous nanostructured zinc (pZn) and the additional macroporosity of the pZn/PTPCz composite films. This work provides a feasible approach for creating oriented 3D CMP-based thin films for advanced applications.
RESUMEN
Metal oxide microparticles with well-defined internal mesostructures are promising materials for a variety of different applications, but practical routes to such materials that allow the constituent structural length scales to be precisely tuned have thus far been difficult to realize. Herein, we describe a novel platform methodology that utilizes self-assembled block copolymer (BCP) microparticles synthesized by dispersion polymerization in supercritical CO2 (scCO2) as universal structure directing agents for both hydrolytic and nonhydrolytic sol-gel routes to metal oxides. Spherically structured poly(methyl methacrylate- block-4-vinylpyridine) (PMMA- b-P4VP) BCP microparticles are translated into a series of the corresponding organic/inorganic composites and pure inorganic derivatives with a high degree of fidelity for the metal oxides TiO2 and LiFePO4. The final products are comprised of particles close to 1 µm in size with a highly ordered internal morphology of interconnected spheres between 20-40 nm in size. Furthermore, our approach is readily scalable, enabling grams of pure or carbon-coated TiO2 and LiFePO4, respectively, to be fabricated in a facile two step route involving ambient temperature mixing and drying stages. Given that both length scales within these BCP microparticles can be controlled independently by minor variations in the reagent quantities used, the present general strategy could represent a milestone in the design and synthesis of hierarchical metal oxides with completely tunable dimensions.
RESUMEN
The diblock copolymer poly[2,2,2-trifluoroethyl methacrylate-r-styrene]-block-poly[(2-cinnamoyloxyethyl methacrylate)] [P(TFEMA-r-Sty)-b-PCEMA] was synthesized via atom transfer radical polymerization. The copolymer underwent self-assembly in TFEMA/CH2Cl2 to form spherical micelles. Photo-cross-linking of the PCEMA domains of these micelles yielded cross-linked nanoparticles. The cross-linked nanoparticles were subsequently cast from CH2Cl2/methanol solvent mixtures at methanol volume fractions of more than 30% to yield rough surfaces bearing small nanobumps on micron-sized aggregations that were connected together to form cross-linked nanoparticles. These surfaces were superhydrophobic with a water contact angle of 161 ± 1° and a sliding angle of 6 ± 1°. Spraying these nanoparticles onto substrates exhibiting microscale roughness, such as filter paper, by a traditional coating technique also created superhydrophobic surfaces. A thin layer of nanoscale spherical protrusions was observed on the microscale fibers of filter paper by scanning electron microscopy. The coated filter paper samples exhibited a water contact angle and a sliding angle of 153 ± 1° and 9 ± 1°, respectively.
RESUMEN
Reported are the formation of rough particulate films from cross-linked diblock copolymer vesicles and nanotubes and the wetting properties of the resultant films. The diblock copolymers used were F66M200 and F95A135, where the subscripts denote the repeat unit numbers, whereas M, A, and F denote poly(2-cinnamoyloxyethyl methacrylate), poly(2-cinnamoyloxyethyl acrylate), and poly(2,2,2-trifluoroethyl methacrylate), respectively. The precursory polymers to F66M200 and F95A135 were prepared by atom transfer radical polymerization. In 2,2,2-trifluoroethyl methacrylate (FEMA), a selective solvent for F, vesicles and tubular micelles were prepared from F66M200 and F95A135, respectively. Photo-cross-linking the M and A blocks of these aggregates yielded hollow nanospheres and nanotubes bearing F coronal chains. These particles were dispersed into CH2Cl2/methanol, where CH2Cl2 was a good solvent for both blocks and methanol was a poor solvent for F. Casting CH2Cl2/methanol dispersions of these particles yielded films consisting of hierarchically assembled diblock copolymer nanoparticles. For example, the hollow nanospheres fused into microspheres bearing nanobumps after being cast from CH2Cl2/methanol at methanol volume fractions of 30 and 50%. The roughness of these films increased as the methanol volume fraction increased. The films that were cast at high methanol contents were superhydrophobic, possessing water contact angles of â¼160° and water sliding angles of â¼3°.
